Clothing Label Silicone Rubber CY-1300H

• Certification: ISO

Product Description

Clothing Label Silicone Rubber CY-1300H

Overview
This product is a two-component addition type liquid silicone rubber, with excellent weather resistance, good dimensional stability, high transparency, non-toxic and environmentally friendly, good adhesion to cloth, heat resistance up to 250 ºC, widely used in the production of clothing labels.

Index
Appearance (base glue/curing agent) transparent viscous liquid/chemical colorless transparent liquid
 Viscosity (base glue) (mPa s) 70000-95000
Operating time (min) ≥150
Hardness (Shore A) 37-45
Tensile strength (MPa) ≥5.0
Elongation (%) ≥300
Tear strength (kN/m) ≥12.0
Density (g/cm3) 1.08-1.12

*This data is not used for specification making performance
Ÿ Two-component, 10:1
Ÿ Excellent weather resistance
Ÿ Good dimensional stability
Ÿ Non-toxic and environmentally friendly
Ÿ Good adhesion to cloth
Ÿ High temperature resistance (250ºC)


Application field
Ÿ Can be used for the production of clothing signs

Instructions
1. Mixing: The base glue and curing agent are mixed at a weight ratio of 10:1 (increasing the amount of curing agent in the glue will slow down the curing speed), and the mixing can be manually stirred or mixed with equipment.
2. Demoulding: The mixed rubber should be vacuum defoamed before making a sign or printing a trademark on the fabric. Under vacuum, the volume of the rubber compound can be increased by 4-5 times, so the defoamed container should be 4-5 times larger than the volume of the rubber compound. ten minutes), the defoaming is over, and it can be carried out in a vacuum desiccator when a small amount is used.
3. Forming: After defoaming, the glue can be dispensed or scraped, and the glue can be injected into the mold and heated to form.
4. Avoid contact with condensation type silicone rubber curing agent during operation. There are also amines, sulfur- and phosphorus-containing compounds and some metal salts that may cause the compound to not cure. Moisture should be avoided during use.
5. It is recommended to put the rubber compound in the container and stir first, and then add the curing agent and stir evenly.

Packaging and Storage
Packing: base glue: 20kg/drum, or 200kg/drum, curing agent: 2kg/pot or 20kg/drum
Storage: Sealed and stored in a cool place
Shelf life: 12 months, its fluidity can be restored under the action of shear force (strong stirring), and it can still be used after passing the re-inspection